Traceroute

Traceroute is a command-line tool that can be used to identify all of the routing hops between two hosts by intentionally exceeding response time from every gateway to a destination. It's usefulness is shown when you need to find an intermediate server for information gathering, or for checking where in a network a site is failing or bottlenecking.

Performing a Traceroute

To perform from windows: from a command prompt type

C:\WINDOWS\System32\cmd.exe

C:\WINDOWS\> tracert domain.com

To perform in a Linux/Unix Terminal type

Terminal

localhost:~ $ traceroute domain.com

Example of Tracert

C:\WINDOWS\System32\cmd.exe

C:\WINDOWS\> tracert google.com Tracing route to google.com [74.125.237.9] over a maximum of 30 hops: 1 6 ms 4 ms 1 ms 192.168.0.1 2 49 ms 33 ms 40 ms 123.123.123.123 3 84 ms 173 ms 107 ms 172.11.11.11 4 43 ms 84 ms 57 ms 172.22.22.22 5 * 70 ms 136 ms 110.110.110.110 6 86 ms 31 ms 33 ms 203.203.11.11 7 170 ms * 83 ms 203.203.22.22 8 117 ms 68 ms 88 ms 74.125.50.1 9 109 ms 69 ms 73 ms 66.249.50.1 10 85 ms 73 ms 152 ms 72.14.237.47 11 * 123 ms 107 ms 74.125.237.9 Trace complete.

This example shows 3 trace packets being sent, resulting in 3 columns of time between each hop. When the trace fails to reach its destination or expires, an asterisk appears in the appropriate column. Also note that in this example, there are 11 hops with the first being the router and the last being the destination (google.com).

Options for Tracert

• -d
  • Do not resolve addresses of router interfaces to host names.

     E.g: wwwcomcast-vip.westchester.pa.bo.comcast.net [69.241.45.4] becomes 69.241.45.4.

• -h < maximum_hops >
  • Limits number of hops to get to the specified domain.
• -j < host_list >
  • Loose source routing along the host-list (IPV4-only).
• -w < timeout >
  • Wait timeout milliseconds for each reply.
• -R
  • Trace round-trip path (IPV6-only).
• -S < srcaddr >
  • Source address to use (IPV6-only).
• -4
  • Force IPV4
• -6
  • Force IPV6

Example of Traceroute

Terminal

localhost:~ $ traceroute yahoo.com

traceroute to www.yahoo.com (69.147.114.210), 30 hops max, 40 byte packets
1  10.2.71.1 (10.2.71.1)  21.965 ms   22.035 ms   22.111 ms
2  (ISP) (ISP gateway)  22.510 ms   25.716 ms   26.073 ms
3  61.246.224.209 (61.246.224.209)  69.212 ms   59.778 ms   63.334 ms
4  59.145.6.1 (59.145.6.1)  65.632 ms   64.750 ms   64.868 ms
5  59.145.11.69 (59.145.11.69)  63.562 ms   64.219 ms   63.742 ms
6  203.208.143.241 (203.208.143.241)  318.632 ms   307.733 ms   316.650 ms
7  203.208.149.25 (203.208.149.25)  317.534 ms   308.116 ms   307.507 ms
8  203.208.186.10 (203.208.186.10)  245.835 ms   247.878 ms   248.862 ms
9  216.115.101.129  286.774 ms   289.702 ms 216.115.101.131  326.470 ms
10  ge-2-1-0-p141.msr1.re1.yahoo.com (216.115.108.19)  324.044 ms   324.497 ms   326.011 ms
11  66.196.112.35  333.479 ms   333.019 ms  66.196.112.201  292.967 ms
12  * * *
13  * * *
14  * * *
15  * * *

Options for Traceroute

This article contains too little information, it should be expanded or updated.
Things you can do to help: add more content. update current content.