Questions about this topic? Sign up to ask in the talk tab.

Dmcrypt

From NetSec
Revision as of 23:10, 18 October 2011 by LashawnSeccombe (Talk | contribs) (Starting and Stopping the Service)

Jump to: navigation, search

DMCrypt and LUKS are Linux utilities used to encrypt storage space. These utilities can be applied to any type of device that is natively understood by your kernel. Devices include anything in the /dev/ directory, however, a user can also create their own flat file and create a loopback device. This works on ANY Linux distribution.

Getting Started

First things first, the first utility needed is cryptsetup. The appropriate package manager will aid with the cryptsetup installation.

     apt-get install cryptsetup
     emerge -q cryptsetup
     pacman -S cryptsetup
     yum install cryptsetup
     ...or whichever package manager applies to you

Encryption Ciphers and Algorithms

A list of the supported encryption ciphers and hashing algorithms for your specific kernel are located in /proc/crypto . To list, run the command:

    cat /proc/crypto | grep name\|digest\|cipher

*Nearly every Linux distribution supports this, however, some LFS and other MINIX variants will not support crypto or crypttab in procfs.

Hashing Algorithms

Digest algorithms are hashing algorithms. At Blackhat Academy, we prefer the whirlpool algorithm, however, sha, md5, sha512 (mac), and ripemd160/320 are viable options. We suggest whirlpool at Blackhat Academy due to the collision resistance, age, and resistance to cryptanalysis attacks. There are no known cryptanalysis attacks that are able to generate reliable collisions on the whirlpool 512 digest.

Ciphers

AES is almost always available. At Blackhat Academy, however, we suggest the blowfish cipher, although, AES, serpent, and twofish are viable options. If /proc/crypto does not produce a favorable list of hashing algorithms and ciphers, refer to your distribution's documentation on installing cryptographic kernel modules. A simple search for "<distro name> kernel crypto module installation" will produce a better selection of algorithms and ciphers. If the distriution is a source-based distribution, simply rebuilding and specifying the desired options inside of menuconfig will provide the desired results.

Setting Up a Block Device

To create a block device, first, you will want to create a partition or a flat file.

Creating a Partition

To create a partition, you can use your preferred partition editor.

    cfdisk /dev/sdx
    fdisk /dev/sdx

After the partitions are created, we will want to format and encrypt the partition with the command:

    cryptsetup luksFormat -c <cipher name> -h <digest name> /path/to/partition (/dev/sdx)
    Ex. To encrypt /dev/sdb2 with whirlpool and blowfish:
    cryptsetup luksFormat -c blowfish -h whirlpool /dev/sdb2

Next, LUKS will prompt you for your passphrase. Enter a password or, alternatively, you can provide a keyfile with --key-file. * When creating a keyfile, be sure that it meets the length criteria for the selected digest algorithm.

After you enter your password, you can move onto [[#LVM and the Device Mapper|the LVM and Device Mapper Section].


Creating a Flat File

If you do not have any unpartitioned space or do not want to create another partition for encryption, you can create a flat file. First, you will want to create the file with touch

    touch /path/to/flatfile
    Ex. touch ~/cryptoImg.img

Next, you will want to use either shred or dd to create the flat file in the appropriate size.

    SHRED:
    If you want a 10GB Partition:
    shred -s 10G /path/to/flatfile
    DD
    dd if=/dev/urandom bs=1024 of=/path/to/flatfile count='echo .|awk '{print (10*1024^2)}'`

Your flat file is now created and is overwritten with random data. Next, you need to set it up as a loopback device. First, you need to determine what loopback devices are already available:

    AS ROOT
    losetup -a

This will list all of the loopback devices on your system. If their is nothing in the list, you can start with loop0:

    losetup /path/to/flatfile /dev/loop0
    In some distributions, you may need to run:
    losetup /path/to/flatfile /dev/loop/

If you receive an error about loop modules, you can use modprobe to start the module or (for source-based distributions):

    find /usr/src/linux -name \*loop\*.ko -exec insmod '{}' \;

Once completed, refer to the LUKS commands and run:

    cryptsetup luksFormat -c <cipher name> -h <digest name> /dev/loop#

*Note: The luksFormat command was run on /dev/loop# and NOT /dev/sdx

LVM and the Device Mapper

Obtaining Support

Now that the partition has been created and is capable of being used for storage, the next step is to obtain LVM and Device Mapper support.

A quick Google search of "<distro name> enabling LVM Device Mapper Support" will provide the solutions you are looking for and tutorials to help you along the way.

Creating Encrypted LVM Partitions

First, you must open up the encrypted device with:

    cryptsetup luksOpen /dev/sdx lvm

Then, you must create your logical partitions:

    lvm pvcreate /dev/mapper/lvm
    lvm vgcreate <volume group name> /dev/mapper/lvm
    lvm lvcreate -L 20GB -n root <volume group name from above>
    lvm lvcreate -L 4GB -n swap <volume group name from above>
    lvm lvcreate -l 100%FREE -n home <volume group name from above>
    *Obviously, the partition sizes can be altered


Encrypting the Flat File

After running the luksOpen command to unlock the partition,

    cryptsetup luksOpen -c blowfish -h whirlpool /dev/sdx /dev/mapper/cryptDir
    *The last parameter becomes the directory in /dev/mapper that you will need to format

you can finally create a filesystem on your encrypted partition with mkfs. For example, using our preferred reiserfs:

    mkfs.reiserfs /dev/mapper/cryptDir

Now, that you have unlocked your keyslot and created your filesystem, you should be able to create and mount your encrypted directory:

    mkdir /home/<username>/encrypted
    mount -o loop /dev/mapper/cryptDir /home/<username>/encrypted

Starting and Stopping the Service

Now, anything that is put into the /home/<username>/encrypted directory is encrypted. To shut down the encryption service:

    umount /home/<username>/encrypted
    cryptsetup luksClose /dev/mapper/cryptDir
    *If you created a loopback device:
    losetup -d /dev/loop#

Now, all of your data is secured in an encrypted partition. To re-open the partition:

    cryptsetup luksOpen /dev/sdx /dev/mapper/cryptDir
    mount -o loop -t reiserfs /dev/mapper/cryptDir /home/<username>/encrypted



Dmcrypt
is part of a series on

Cryptography

Visit the Cryptography Portal for complete coverage.